The production and consumption of wood industry "standardized" second revolution

From the carpenter scene to fight the system to the factory customized production, China's wood industry began many years ago doors industrial revolution. Now, as to accelerate the process of industrialization of residential and doors of the consumer market is growing, the wood industry "custom" processing small-scale production is gradually toward the "standardized" forward, consumption patterns are changed, and then the wood industry began to standardization "Manufactured Stone Veneer The production and consumption as an opportunity to re-revolution.

This round of changes is small-scale customized production to large-scale standardized production changes. Such agents of change from the doors of the consumer areas of higher quality, shorter delivery time, new technology, new value to enhance the demand. Commonly used in the wood industry "custom" processing mode to manual and semi-manual processing mode and process production, based on quality and process advantages of large-scale production is difficult to use in the "custom" and appeared restricted doors production continued to improve the quality, process improvement, to improve the efficiency of the process, which has prompted a wooden door industrialization change to speed up the formation. Typically, a single wooden door supporting the production capacity required to achieve an annual output of more than 200,000 sets of the benefits of standardization can significantly reflect current the custom door production and consumption patterns far to reach this level. The doors again revolution calling for "standardization" as soon as possible.
Standard door "in accordance with uniform standards of production, spending accordance with uniform standards, just like today's apparel industry, the production of the factory in accordance with the standard number, select the number of consumers according to their body consumption, while the standard is essential to building construction words, the door should be standard size series of finished products, standard doors could be dispensed with site measurement and delivery see not the same kind of standard doors to reduce the complicated aspects of the non-standard custom, manufacturing, management, transportation. Thus, short lead times, product stability, a sense of higher value.
Step one: stone floor dust regularly once a day, if possible. Dust frequency is determined based on the flow of people.
Step two: with a wet mop to clean the floor, if necessary, stone soap. You can only be cleaned with water. Not going through the motions.
Step three: every two to three years to re-polished stone floors, or experts to polishing. When you realize that the stone floor has begun to fade, it would need to re-polishing.
Step four: the unlikely event of a spill, should be immediately removed.
Step Five: Fix the depth of the scratches on the stone floors, the best experts to repair, if it is found to be timely processing.
Tips
1, if there is no stone soap, use a mild soap replace.
2, best dust mops and wet mops used separately for other places do not.
To prevent gravel dust into the stone floor, they will scratch the destroyed floor.
Do not use vinegar, chemical cleaning agents, or waxing on the stone Manufactured Stone Veneer floor.

5, the gloss on the stone floor dim only one repair method that is reground.